MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

Introduction to MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing are important components in mechanical systems used to support rotating parts (such as gears, pulleys or sprockets) and transmit torque. They play a key role in mechanical equipment by connecting the power source with the working parts to ensure the effective transmission of power.

Characteristic advantages of MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

High precision: adopting precision machining technology ensures the size and shape accuracy of the shaft and improves the transmission efficiency.

High strength: made of high-quality materials with good tensile, compressive and wear-resistant properties.

Reliability: After strict quality control, it ensures stable operation for a long time.

Versatile design: A variety of specifications and types are available to suit different applications.

Easy maintenance: the structure is designed for easy installation and repair, reducing maintenance costs.

(MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing)

Specification of MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

These MTB quick release hubs get your wheels on and off fast. They fit standard mountain bike frames front and back. Forget wrestling with tools for wheel changes. The quick release lever is simple. Open it, slide the wheel out. Reverse the process to put it back. Tighten the lever snug. That’s it.

The hollow axle shafts keep things light. Less weight helps your bike feel quicker. But don’t worry about strength. The axles handle tough trails just fine. They’re built strong. Aluminum hubs and steel components resist wear. These parts last.

Front and rear hubs come together. You get the complete set. Standard spacing means they fit most mountain bikes. Check your frame specs first. Match the hub width to your frame’s dropouts. Common sizes are 100mm front, 135mm rear for older MTBs. Newer boost standards need different hubs.

The hollow design saves grams. Every bit helps climbing. The sealed bearings roll smooth. They keep dirt and water out. This means less maintenance. Just a quick clean now and then usually does it.

Installation is straightforward. Slide the axle into your wheel hub. Fit the wheel into the frame dropouts. Slide the quick release skewer through the hollow axle. Tighten the adjusting nut finger-tight. Then flip the lever closed. It should feel firm. Not loose. Not too tight. Check it before every ride. Safety matters.

This system is perfect for trail riders. Pull a wheel fast for transport or a flat tire. Get rolling again quickly. No special tools needed. Just your hands. Durable materials handle bumps and jumps.

(MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing)

Applications of MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

Here’s the product content about those MTB quick release hubs. It’s written plainly and directly, focusing on the rider’s experience and the product’s practical benefits.

These MTB quick release hubs are built tough for mountain biking. They fit both the front and rear wheels. Standard spacing means they work with most mountain bike frames. You get a complete axle set ready to install.

The quick release lever is the big win. Tighten or loosen your wheels in seconds. Forget wrestling with multiple tools trailside. Need to fix a flat? Pop your wheel off fast. Loading your bike onto a car rack? Removing wheels makes it simpler. This lever gives you that speed.

Security matters too. A well-tightened QR lever holds your wheel firmly. It won’t rattle loose easily over rough trails. You feel confident pushing hard downhill. The design prevents accidental opening. Your wheel stays put until you flip that lever yourself.

Hollow axle shafts are key. They cut weight without losing strength. Less rotating mass helps your bike feel quicker. It accelerates easier. Every gram saved counts on long climbs. The hollow design achieves this strength-to-weight balance. It handles the hard hits mountain bikes take.

Reliability is crucial. These hubs use strong materials and precise machining. They endure mud, water, and constant vibration. Smooth bearings keep the wheel spinning freely. This reduces drag. You get more efficiency from your pedaling effort. Consistent performance ride after ride is the goal.

Upgrading to this QR set makes sense. Installation is usually straightforward. It replaces old bolt-on axles fast. You gain the convenience of tool-free wheel removal immediately. The hollow axles offer a noticeable weight saving. Your bike gains functionality and sheds a little weight.

Company Introduction

Established in 2002, Port of Machinery Co.,ltd. focus on metal research and mining machinery spare parts. 2 factories over an area of 13,300 square meters, based on 100+ sets of equipment, our production capacity reaches 12000 Tons/Year. has passed ISO 9001 quality managment system certification in 2008.

Our mainly products are dragline excavator spare parts,rotary kiln spare parts, large modulus gear (gear shaft), gearbox ect. 40+ patents with over 45 years experience to help focus on improve the service life of spare parts. We belive that more than 80% reason of mechanical parts’ working life depends on hot processing (steel making/forging/casting/welding/heat treatment). Eight material engineers will control the quality from the original resource.

If you are interested, please feel free to contact us.

5 FAQs of MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing

This quick release hub set replaces solid axles on many bikes. Here are common questions:

What comes in the box?
You get two quick release skewers. One fits the front wheel. One fits the rear wheel. Both have hollow shafts. They include necessary springs and levers. Standard spacing fits most bikes.

Will these fit my bike?
Check your bike’s fork and frame spacing. Front spacing is usually 100mm. Rear spacing is usually 135mm for mountain bikes. Road bikes often use 130mm rear spacing. Measure your bike. Match it to the product specs. Standard spacing covers most common sizes.

How do I install them?
Remove your old solid axle. Slide the hollow shaft through the wheel hub. Put the springs on the skewer ends. Point the springs inward. Insert the skewer into the dropouts on the frame or fork. Close the lever. Flip it tight. The lever should feel firm. It should leave a clear imprint on your hand.

Are they secure?
Yes. Flip the lever closed firmly. This clamps the wheel tightly. The hollow shaft is strong. It handles normal riding forces. Check the lever is tight before every ride. Give it a quick test pull. It should not move.

Do they need maintenance?
Keep them clean. Wipe off dirt and grime. Lubricate the threads sometimes. Use a light oil. Check for bends or damage. Replace the skewer if it bends. A bent skewer won’t hold right.

(MTB Bicycle Quick Release Hub, Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing)